UK Tenders: Live Public Sector Contracts

LEL must establish whether the Hawley Road site can be retained or, if not, identify a suitable replacement capable of meeting current and future operational requirements before the lease expires in February 2030. The key question is what constitutes the most deliverable, operationally suitable and value-for-money solution for providing LEL's transport yard facilities beyond February 2030. LEL will therefore appoint a suitably qualified consultant to undertake a feasibility study and strategic options appraisal, assessing suitable alternatives and recommending a preferred option and next steps. Based on LEL's estimated timescales for designing, constructing and transitioning into a new site, there is a need to undertake a feasibility study to identify alternative transport yard options as soon as possible, with a preferred way forward decided by June 2027. This timetable is intended to enable the preferred option to progress into design and procurement during 2027, followed by the necessary environmental assessment, planning and permitting activities and subject to approvals, construction. The Consultant shall therefore plan and deliver the commission to support timely decision-making and protect the overall programme ahead of the Hawley Road lease expiry in February 2030. Additional information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.

For the provision to join Dynamic Marker membership fir surfacing works at LondonEnergy's 8 Sites

Please provide a quotation for the supply and installation of 8 EV charger units/Pedestals across two of our sites: - Hawley Road Transport Yard car park - (3 dual pedestals + 1 single pedestal) - The EcoPark Energy Centre, reception car park - (4 dual pedestals) Including removal of existing equipment If you have any further questions please email lewis.atkinson@londonenergyltd.com * To see full spec and to respond to this opportunity, please click here: https://www.delta-esourcing.com/respond/83NX2G7ZX9 If you experience any technical difficulties from accessing the above url, then please contact the Delta eSourcing Helpdesk on call 0800 923 9236 or email helpdesk@delta-esourcing.com. - To access this competition: login to https://suppliers.multiquote.com and view the opportunity RA359950. Not registered on MultiQuote - visit https://suppliers.multiquote.com then register and quote RA359950 as the reason for registration. Any queries please contact MultiQuote on 0151 482 9230.

LondonEnergy Ltd (LEL) is establishing a Dynamic Market for the provision of surfacing, resurfacing and associated highways/civils works across LEL sites and other locations for which LEL is responsible. Please apply via Delta eSourciing Platform using access code 86S9883S36. Please email Lewis.atkinson@londonenergyltd.com if you have any questions. The Dynamic Market is intended to provide LEL with access to suitably qualified, experienced and competent contractors capable of delivering surfacing works on an as-required basis. Individual requirements will be competed or awarded through the Dynamic Market in accordance with the applicable procurement documents and award procedures. The scope of works may include, but is not limited to: Asphalt and tarmac surfacing and resurfacing; Roadway, access road, yard and car park surfacing; Removal and replacement of existing surfacing; Surface repairs, patching and pothole repairs; Planing and preparation of existing surfaces; Installation and repair of kerbs, edgings and channels; Footway and pedestrian area surfacing; Concrete repairs and associated minor civils works; Drainage adjustments associated with surfacing works; Road markings, line marking and associated finishes; Formation and reinstatement of areas following excavation or other works; Preparation of sub-base and base layers where required; Temporary surfacing and emergency repairs; and Any other ancillary works reasonably associated with the delivery of surfacing and resurfacing activities. Works may vary in value, size, complexity and location, ranging from minor reactive repairs through to larger planned resurfacing projects. Suppliers appointed to the Dynamic Market will be expected to demonstrate appropriate technical capability, experience, resources, health and safety arrangements, insurances, accreditations and competence relevant to the works being undertaken. Specific requirements, specifications, quantities, programme, site conditions and award criteria will be detailed within individual call-off or competitive exercises undertaken through the Dynamic Market. Admission to the Dynamic Market does not guarantee any minimum level or value of work, and LEL reserves the right to procure individual requirements in accordance with the procedures established for the Dynamic Market and applicable procurement legislation. - To access this competition: login to https://suppliers.multiquote.com and view the opportunity RA359924. Not registered on MultiQuote - visit https://suppliers.multiquote.com then register and quote RA359924 as the reason for registration. Any queries please contact MultiQuote on 0151 482 9230.

**Please note this is a Market Engagement exercise to attract interest for our upcoming Tender. If you wish to be invited to participate in the tender please email declaration of interest to Procurement@Londonenergyltd.com** Spec: 3. Scope of Works The contractor shall provide a complete engineered fire detection and suppression system, including all labour, materials, plant, access equipment, design services, testing equipment, certification and documentation necessary to deliver a fully operational system. The protected scope comprises four individual turbine areas within the Turbine Hall. For tendering purposes, each turbine shall be assumed to have an approximate protected area of 15 m², giving an indicative total protected turbine area of approximately 60 m². Tenderers shall verify all dimensions, access constraints, hazard locations and coverage requirements during the site survey and shall base the final design on confirmed site measurements and risk assessment. • Site surveys and risk assessment of the Turbine Hall and protected turbine assets. • Design of the fire detection, alarm interface and suppression system. • Selection and supply of detectors, control panels, suppression equipment, pipework, nozzles, cylinders, pumps, valves, cabling, containment, signage and ancillary equipment. • Installation of all system components, including interfaces with existing fire alarm, plant control, shutdown, ventilation or building management systems where required. • Factory acceptance testing, site acceptance testing, commissioning and functional performance testing. • Provision of certification, operation and maintenance manuals, as-built drawings, cause-and-effect documentation and training. • Provision of warranty, defects support and proposals for ongoing inspection, testing and maintenance. 4. Regulatory and Standards Compliance The system and all works shall comply with all applicable UK legislation, regulations, approved guidance and recognised standards current at the date of tender and installation. The contractor shall identify and declare all applicable standards within their tender submission and shall state any proposed deviations. • Regulatory Reform (Fire Safety) Order 2005 and the duties of the Responsible Person. • BS 5839-1 for fire detection and fire alarm systems in non-domestic premises, including design, installation, commissioning and maintenance requirements. • Applicable BS EN 54 standards for fire detection and alarm components. • Applicable standards for the selected suppression technology, which may include BS EN 15004 for gaseous extinguishing systems, BS 8489 for industrial and commercial watermist systems, BS EN 12845 for sprinkler systems, or other relevant recognised standards appropriate to the proposed solution. • Where water mist is proposed, the system shall comply with BS 8489 or another applicable recognised standard for industrial and commercial water mist systems, together with manufacturer approvals, fire test evidence and any insurer requirements relevant to turbine or machinery-space oil-fire protection. • BS 7273 requirements for interfaces between fire detection systems and ancillary fire protection measures, where applicable. • Health and Safety at Work etc. Act 1974, CDM Regulations 2015, Electricity at Work Regulations 1989 and all applicable site safety requirements. • Manufacturer installation instructions, insurer requirements and industry best practice. 5. Technical Requirements 5.1 Fire Risk Basis The principal fire risk within the protected turbine areas arises from steam pipework operating at conditions and temperatures above the flash point of the oil used within the turbine systems. Oil pipework and steam pipework run adjacent to one another, increasing the likelihood that an oil leak, spray, mist or release could come into contact with hot steam pipework or other high-temperature surfaces and ignite. The fire detection and suppression design shall therefore be based on credible oil-release scenarios, including pressurised leakage, dripping, pooling, spray impingement, atomised mist and contact with hot pipework or adjacent hot surfaces. Tenderers shall explain how their proposed solution detects and suppresses fires originating from these scenarios at an early stage and how the design reduces the risk of fire escalation to adjacent turbine equipment, cable routes, insulation, lagging and structural elements. 5.2 Fire Detection • The detection system shall provide reliable early warning appropriate to the turbine risk profile and environmental conditions within the Turbine Hall, with particular consideration of oil leakage onto high-temperature steam pipework and associated hot-surface ignition scenarios. • The preferred detection technology is infrared flame detection. Tenderers shall propose IR flame detectors, or an equivalent or superior flame detection solution, and shall justify the suitability of the proposed technology for the turbine environment. • The detection system shall be capable of reliable operation in dark conditions and in areas containing numerous hot surfaces, including turbine casings, pipework, lagging, exhaust surfaces and other high-temperature equipment. • The system shall be capable of detecting fires fuelled by different substances and materials reasonably foreseeable within the Turbine Hall environment, including but not limited to hydrocarbon fuels, lubricating oils, electrical equipment, insulation materials, plastics, cable materials and other combustible or flammable materials associated with turbine operation and maintenance. • The design shall address potential false alarm sources, including hot surfaces, reflected radiation, welding or maintenance activities, sunlight or artificial light, airflow, temperature variation, dust, vibration, access constraints and maintenance requirements. • The system shall include appropriate zoning, device identification, alarm indication and integration with the existing fire alarm infrastructure. • The tenderer shall provide a proposed cause-and-effect matrix showing alarms, alerts, shutdowns, suppression release logic, delays, interlocks, manual release and abort functions where applicable. 5.3 Fire Suppression The suppression design shall provide suitable protection for all four turbine areas. Tenderers shall state whether their proposed suppression approach is based on individual turbine local application, grouped zone protection, total flooding or another engineered arrangement, and shall justify how the design achieves effective coverage for each approximate 15 m² turbine area. • The suppression system shall be suitable for the turbine fire risks, including oil leakage or spray onto steam pipework operating above the oil flash point, electrical, mechanical and hot-surface ignition scenarios where relevant. • Any water mist design shall be suitable for oil leakage, spray or pool-fire scenarios involving ignition on or near high-temperature steam pipework and other hot surfaces, and shall demonstrate effective suppression or control without relying on excessive water application. • The preferred suppression technology is a water mist system, selected to minimise water usage, reduce collateral damage and improve suppression effectiveness for credible oil-fire scenarios within the turbine areas. Tenderers shall propose a water mist solution, or an equivalent or superior suppression technology, and shall justify the selected suppression medium and method, including design basis, discharge performance, droplet characteristics, protected volume or local application approach, compatibility with turbine equipment and impact on personnel safety. • The solution shall minimise collateral damage, avoid unacceptable operational impact and be suitable for the environmental conditions of the Turbine Hall. • The system shall include all required detection-release controls, manual release points, lock-off or isolation arrangements, warning devices, signage, monitoring, status indication and fault reporting. • The contractor shall identify any requirements for ventilation shutdown, plant trip, fuel or oil isolation, electrical isolation, dampers, access control, evacuation warnings or post-discharge recovery. 5.4 Integration and Interfaces The contractor shall identify all required interfaces with existing site systems and shall include the design, testing and commissioning of those interfaces within their tender price unless explicitly excluded. Interfaces may include the existing fire alarm system, turbine controls, emergency shutdown systems, ventilation controls, building management systems, security systems, local alarms and remote monitoring arrangements. 6. Contractor Competence and Quality Requirements • Tenderers shall demonstrate proven experience in designing and installing fire detection and suppression systems in industrial, power generation, energy-from-waste, turbine, machinery space or comparable high-value asset environments. • Tenderers shall provide evidence of relevant third-party certification, competent-person arrangements, manufacturer accreditation and quality management systems. • All works shall be undertaken by trained and competent personnel using approved materials and methods. • The contractor shall provide project-specific risk assessments, method statements, lifting plans, access plans, isolation requirements and commissioning procedures before commencing work. 7. Tender Submission Requirements Tender submissions shall include sufficient technical and commercial information to allow LondonEnergy to evaluate the proposed solution. At a minimum, tenderers shall provide: • Executive summary of the proposed solution. • Technical design narrative and design assumptions. • Drawings, schematics, coverage philosophy and preliminary equipment layout. • Proposed detection and suppression technologies with justification. • Compliance matrix against applicable legislation, standards and this tender document. • Programme showing survey, design, procurement, installation, commissioning and handover activities. • Detailed commercial submission, including itemised costs, exclusions, assumptions and optional items. • Details of warranties, maintenance requirements, spares, consumables and lifecycle costs. • Evidence of competence, accreditations, case studies and references. • Health, safety, environmental and quality documentation. 8. Deliverables • Approved design package and technical submittals. • Installation drawings, cable schedules, equipment schedules and interface schedules. • Cause-and-effect matrix and commissioning test plan. • Completed installation, commissioning and acceptance certificates. • As-built drawings and operation and maintenance manuals. • Training records and user guidance for operators and maintainers. • Maintenance schedule and recommended spares list. • Final handover pack suitable for inclusion in LondonEnergy's fire safety records. 9. Site Constraints and Operational Requirements The Turbine Hall is an operational industrial environment. The contractor shall plan and execute the works to minimise disruption and maintain safe operation. The tenderer shall clearly state any requirements for outages, isolations, access scaffolding, lifting operations, hot works, intrusive works or operational restrictions. All site activities shall be coordinated with LondonEnergy and shall comply with site permit-to-work requirements. 10. Commercial and Contractual Requirements • Tender prices shall be submitted in pounds sterling and shall clearly identify VAT treatment. • Tenderers shall state all assumptions, exclusions, dependencies and optional costs. • The contractor shall be responsible for defects arising from design, workmanship, installation or supplied equipment within the agreed warranty period. • All intellectual property, drawings, calculations and documentation produced specifically for the project shall be made available to LondonEnergy for operation, maintenance and future modification of the installed system. • LondonEnergy reserves the right not to accept the lowest or any tender and may seek clarification, negotiation or best and final offers as part of the procurement process. 11. Clarifications, Site Visits and Submission Process Tenderers shall submit clarification questions in writing by the deadline stated in the procurement timetable. Site visits may be arranged by appointment and shall be subject to LondonEnergy's safety and security requirements. Final tender submissions shall be provided in the format and by the deadline specified in the invitation pack. 12. Important Tender Notes • The tenderer shall satisfy itself as to the site conditions, turbine risk profile and suitability of its proposed design. • Any proposed departure from legislation, British Standards, manufacturer instructions or this specification shall be clearly identified and justified. • The system shall not be deemed complete until all testing, commissioning, certification, documentation, training and handover requirements have been accepted by LondonEnergy. • Where uncertainty exists, the contractor shall adopt the higher standard of protection unless otherwise agreed in writing by LondonEnergy. - To access this competition: login to https://suppliers.multiquote.com and view the opportunity RA359497. Not registered on MultiQuote - visit https://suppliers.multiquote.com then register and quote RA359497 as the reason for registration. Any queries please contact MultiQuote on 0151 482 9230.

Please see specification below. Please contact lewis.atkinson@londonenergyltd.com with any proposals or clarifications. i. LondonEnergy Ltd ("LEL") is seeking to appoint a suitable qualified and experienced Occupational Health ("OH") provider to deliver a comprehensive, responsive and proactive Occupational Health Service to support the health, wellbeing and attendance management of our 350+ workforce. The appointed provider will work in partnership with LEL to deliver high-quality occupational health services that support employee wellbeing, promote fitness for work, facilitate effective case management and assist the organisation in meeting its legal and statutory obligations under relevant health and safety and employment legislation. LEL employs a diverse workforce operating across office-based, operational and engineering environments, with employees undertaking a range of safety-critical and physically demanding roles. As such, the Occupational Health Service must be capable of providing timely, pragmatic and evidence-based advice to managers, employees and the Human Resources team. The successful provider will be expected to deliver a modern, flexible and customer-focused service incorporating both remote and face-to-face appointments where appropriate, supported by secure digital systems, robust management information and effective account management. ii. General • Ability to book face-to-face OH appointments where the case would benefit from a face-to-face appt. • Local clinic or local hub where face-to-face appointments can be held located close to Eco Park, Tottenham Hale or Liverpool Street. • Ability to book urgent OH appointments and not just rely on cancellations being available to do so. • Regular meetings with our client relationship manager. • Ability to have a case conference call with the OH doctor, if possible, for complex cases. • Supply of useful data to us by OH provider on a quarterly basis to feed into the Board Report. • User friendly OH portal to make referrals on and then be able to see the reports on and historical reports for employees too. iii. Technology • Secure online portal • Ability to communicate directly with physician • Ability to integrate with HR systems in future / API's • Electronic referral and reporting iv. Data and Reporting Our existing providers ability to pull any data/reporting is non-existent. Would like to see a secure portal and understand what management information can be provided on a month basis i.e. • Referral volumes • Referral reasons • Department trends • Absence hotspots • Safety Critical roles • Drivers • Shift work v. Additional Services • Ergonomic assessments • Manager training • Health/wellbeing initiatives - To access this competition: login to https://suppliers.multiquote.com and view the opportunity RA359362. Not registered on MultiQuote - visit https://suppliers.multiquote.com then register and quote RA359362 as the reason for registration. Any queries please contact MultiQuote on 0151 482 9230.